MegaTech R/C Real World Helicopter Series Uživatelský manuál stáhnout pdf (Strana 41)

SPECIFICATIONS

MODEL: Aresti 40

MANUFACTURER: Hangar 9

DISTRIBUTOR: Horizon Hobby

TYPE: sport aerobatic ARF

WINGSPAN: 56 in.

WING AREA: 565 sq. in.

WEIGHT: 5.85 Ib.

WING LOADING: 23.9 oz./sq. ft.

LENGTH: 49 in.

ENGINE REQ'D: .40 to .58 2-stroke or .40

to .72 4-stroke

ENGINE USED: Saito FA .72 4-stroke

RADIO REQ'D: 4-channel with 5 servos

(rudder, 2 ailerons, elevator and throttle)

RADIO USED: JR 10X

FUEL USED: Wildcat 15%

PROP USED: APC 12x8

PRICE: $169.99

HITS

• Outstanding aerobatic performance.

• Excellent instruction manual.

• Nicely finished fiberglass cowl and

wheel pants.

MISSES

• No instructions for mounting 4-stroke

engines.

FEATURES: built airframe covered with

UltraCote; painted fiberglass cowl and

wheel pants; tinted canopy; fuel tank with

hardware; painted aluminum landing

gear; hardware package; photo-illustrated

instruction manual.

COMMENTS: the Hangar 9 Aresti 40 ARF

Is an easy-to-build aerobatic model that

really performs, and Its attractive

UltraCote color scheme is easy to see

while performing aerobatics. The model's

precise handling characteristics are a real

confidence builder for the student aero-

batic pilot and a joy for the skilled pilot.

Give one a try. You'll love it!

KIT FEATURES

The Aresti 40 is well built and comes

expertly covered with Hangar 9

UltraCote; the four-color scheme is very

attractive and is highly visible during

maneuvers. The kit includes a fuel tank

with hardware, painted 2-piece alu-

minum landing gear and wheels,

tailwheel and steering assembly, univer-

sal aluminum engine mount, tinted

canopy, hinges and all the required con-

trol-system hardware.

The major parts come individually

wrapped in plastic bags, and there were

very few wrinkles in the covering. The

42-page instruction manual is chock full

of helpful photos detailing the assembly

process. It is organized into 20 sections

and has three to six clear photographs on

each page. It also lists other tools and

supplies needed to complete the model.

The Aresti goes together easily and

takes only two or three evenings to com-

plete. Assembly is quite typical of today's

quality-engineered ARF models and offers

no surprises.

WING ASSEMBLY

All of the Aresti's control surfaces are pre-

slotted, and assembly begins by attaching

the ailerons to each wing half using the

supplied CA hinges and some thin CA.

I joined the wing halves with the 1-piece

plywood wing joiner. The joiner is flat on

one side and tapered on the other: the

tapered side faces forward and slides into

a slot in each wing half. The joiner also

sets the dihedral angle of 1

x

-

:

i inches.

Installing the aileron servos is next. 1

located the necessary hardware, and then

cut out the servo openings in the wing.

You'll need to supply two 6-inch servo

extensions, and the instructions provide a

useful tip to help thread the extensions

through the wing using a string and a nut

to "plumb" it through the wing. After 1

mounted the servos, I connected the link-

ages from the servos to the ailerons.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 74 75

Komentáře k této Příručce

Žádné komentáře